If Your Roku remote is not working, it might be one of several distinct difficulties, a few which are simple yet others more technical.
Within the following piece, we’ll allow you to solve the issues for that your Roku remote controller has stopped working. Also, finally, it is likely to allow it to work.
1 Check Your Roku Remote Batteries
Let us focus on the straightforward explanation. Are you sure the device’s batteries have not come to an end? A slowly degrading performance can be a surefire indication the power source might be the issue.
A few Roku remote controllers require 2 AA batteries; the others require 2 AAAs. Check the decal on the distant assess. The cells have been accessible from supporting the sliding board on the back of this gadget.
2 Restart Roku Remote and Roku Player or Stick
First, you want to remove the batteries from your remote.
Remove the power cable from your Roku player/stick, wait approximately 5 seconds, then reconnect power to the device.
When the Roku logo displays on the home screen, reinstall the batteries in the remote.
Wait approximately 30 seconds to see if the remote re-establishes a connection with your Roku device.
3 Re-Pair the Roku Remote
It is possible to reset Roku remotes by performing a specific order during the carton or stick out the boot procedure.
- Remove the batteries out of the Roku remote.
- Remove the power supply from the Roku box/stick (or go to Settings > System > System Restart > Restart for those who might have an IR Roku remote that’s still working).
- Wait 10 minutes and then reconnect your Roku box to the ability.
- Await your Home screen to load.
- Reinsert the batteries to your Roku remote.
- In the event the Roku television remote still does not operate, then move onto our next tip.
4 Check for HDMI Interference
In his literature, Roku admits that the remote controls of some of his models are changed by interference on neighbouring HDMI cables. The problem is particularly prevalent in Roku streaming devices that connect directly to the HDMI interface of your TV.
The remedy is always to use an HDMI cable extender, which allows your transmission device to be adjusted further from the TV’s HDMI port.
You can use an HDMI extender that you have in your residence. But if you don’t have anyone yet, Roku will send you a short extender at no cost. To keep your cable-free, you must complete the corresponding form on the Roku site.
5 Check Your HDMI Connector
Roku Streaming sticks are installed on your TV through the HDMI interface. When you have connected your device to the HDMI port, you may have an obstacle.
To cure this, you’ll want an HDMI expansion, which can be found free of Roku. Just make sure you have your own manageable Roku sequential number; You need to be in a sticker on your device.
You can also pass the transmission bar to another HDMI port if your TV has someone left over.
6 Check Your Network Connection
Based on if you’ve got a Roku player or perhaps a streaming rod, your Roku apparatus will possess a minimum of 1 network connection.
On Roku players, many have wired and wireless options; loading sticks need wireless network entrance.
If your remote isn’t working as of this stage, then you might need to download the program to assess settings.
In your Roku menu, then scroll to Settings and tap on Okay on the program.
Harness Around. On the right-hand side of this screen, you have to watch Status.